单节保护规格参数
1S Lithium re-chargeable protection circuit with Overcharge,Overdischarge,Discharge current & Short protection functions

Symbol Conditions Toc & Tod is per cell Limits Described at 25C Min. Typ. Max. Unit VDET1 Over charge detection voltage 过充电检测电压 3.65 ～ 4.35 V tVDET1 Over charge detection delay time 过充电检测延迟时间 0.96 ～ 1.40 S VREL1 Over charge release voltage 过充电解除电压 3.45 ～ 4.35 V VDET2 Over discharge detection voltage 过放电检测电压 2.0 ～ 3.0 V tVDET2 Over discharge detection delay time 过放电检测延迟时间 115 ～ 173 mS VREL2 Over discharge release voltage 过放电解除电压 2.0 ～ 3.4 V VDET3 Over current detection voltage 过电流检测电压 0.065 ～ 0.2 V IDP Over current detection current 过电流保护电流 1.0 ～ 15 A tVDET3 Over current detection delay time 过电流检测延迟时间 7.2 ～ 11 mS TSHORT Short protection detection delay time 短路检测延迟时间 50 ～ 700 uS RSS Main loop electrify resistance 主回路通态电阻 ～ ～ 70 mΩ IDD Current consume in normal operation 工作时电路内部消耗 1.0 ～ 7.0 uA

以上参数仅供参考！
Above datas only for reference.

双节保护板规格参数
2S Lithium re-chargeable protection circuit with Overcharge,Overdischarge,Discharge current & Short protection functions.

Symbol Conditions Toc & Tod is per cell Limits Described at 25C Min. Typ. Max. Unit VDET1 Over charge detection voltage 过充电检测电压 3.65 ～ 4.35 V tVDET1 Over charge detection delay time 过充电检测延迟时间 0.92 ～ 1.38 S VREL1 Over charge release voltage 过充电解除电压 3.65 ～ 4.20 V VDET2 Over discharge detection voltage 过放电检测电压 2.0 ～ 3.0 V tVDET2 Over discharge detection delay time 过放电检测延迟时间 115 ～ 173 mS VREL2 Over discharge release voltage 过放电解除电压 2.0 ～ 3.4 V VDET3 Over current detection voltage 过电流检测电压 0.10 ～ 0.30 V IDP Over current detection current 过电流保护电流 2.0 ～ 30.0 A tVDET3 Over current detection delay time 过电流检测延迟时间 7.2 ～ 11 mS TSHORT Short protection detection delay time 短路检测延迟时间 220 ～ 380 uS RSS Main loop electrify resistance 主回路通态电阻 ～ ～ 70 mΩ IDD Current consume in normal operation 工作时电路内部消耗 1.0 ～ 15 uA

三、四节带模拟电量指示保护板规格参数
3S/4S Lithium re-chargeable protection circuit with Overcharge,Overdischarge,Discharge current&Short protection functions.

Symbol Conditions Toc & Tod is per cell Limits Described at 25C Min. Typ. Max. Unit VDET1 Over charge detection voltage 过充电检测电压 3.9 ～ 4.35 V tVDET1 Over charge detection delay time 过充电检测延迟时间 0.5 ～ 1.5 S VREL1 Over charge release voltage 过充电解除电压 3.8 ～ 4.20 V VDET2 Over discharge detection voltage 过放电检测电压 2.0 ～ 3.0 V tVDET2 Over discharge detection delay time 过放电检测延迟时间 50 ～ 150 mS VREL2 Over discharge release voltage 过放电解除电压 2.0 ～ 3.4 V VDET3 Over current detection voltage 过电流检测电压 0.10 ～ 0.3 V IDP Over current detection current 过电流保护电流 2 ～ 30 A tVDET3 Over current detection delay time 过电流检测延迟时间 5.0 ～ 15 mS TSHORT Short protection detection delay time 短路检测延迟时间 100 300 600 uS RSS Main loop electrify resistance 主回路通态电阻 ～ ～ 40 mΩ IDD Current consume in normal operation 工作时电路内部消耗 ～ 12 30 uA Five LED indications 五段电量指示

三、四节带均衡保护板规格参数
3S/4S Lithium re-chargeable protection circuit with Overcharge,Overdischarge,Discharge current&Short protection functions

Symbol Conditions Toc & Tod is per cell Limits Described at 25C Min. Typ. Max. Unit VDET1 Over charge detection voltage 过充电检测电压 3.9 ～ 4.35 V tVDET1 Over charge detection delay time 过充电检测延迟时间 0.5 ～ 1.5 S VREL1 Over charge release voltage 过充电解除电压 3.8 ～ 4.20 V VDET2 Over discharge detection voltage 过放电检测电压 2.0 ～ 3.0 V tVDET2 Over discharge detection delay time 过放电检测延迟时间 50 ～ 150 mS VREL2 Over discharge release voltage 过放电解除电压 2.0 ～ 3.4 V VDET3 Over current detection voltage 过电流检测电压 0.10 ～ 0.3 V IDP Over current detection current 过电流保护电流 2 ～ 30 A tVDET3 Over current detection delay time 过电流检测延迟时间 5.0 ～ 15 mS TSHORT Short protection detection delay time 短路检测延迟时间 100 300 600 uS RSS Main loop electrify resistance 主回路通态电阻 ～ ～ 40 mΩ IDD Current consume in normal operation 工作时电路内部消耗 ～ 50 70 uA Bleedstartpoint 均衡开启电压 4.20 V BleedCurrent 均衡电流 100 180 mA

以上参数仅供参考！
Above datas only for reference.